Concrete Countertop Sealer - Solvent Based High Gloss, Surecrete PC12 Surecrete
Concrete Countertop Sealer - Solvent Based High Gloss, Surecrete PC12 Surecrete
Concrete Countertop Sealer - Solvent Based High Gloss, Surecrete PC12 Surecrete

Concrete Countertop Sealer - Solvent Based High Gloss, Surecrete PC12

Sale price$99.09
Quantity:
Fast Ship: Usually takes 1-2 business days to ship out.
Ships from Oregon
(Click for average Ground delivery map )
Ships via FedEx/UPS only

Concrete Countertop Sealer - Solvent Based High Gloss, Surecrete PC12

  • Thin High Gloss Concrete Casting Sealer Xtreme Series XS PC12™
  • Solvent Based sealer will darken the concrete, called "Color Enhancing", similar to when the concrete is wet. 
  • SureCrete’s Xtreme Series XS Pc12™ is a solvent-based clear high gloss concrete casting sealer that is easy to apply. Manufactured with high-quality materials, PC-12 is a great choice for sealing your concrete cast pieces for a long durable surface.
  • Food Safe (FDA Approved) Countertop Sealer.
  • Good for Exterior and Interior application.
  • Low VOCs (400 g/L)
  • Coverage: 1 Quart Kit will cover 100 sq. ft. per coat.  Most countertops should have 2 coats applied, so plan on around 50 sq. ft. of coverage per quart kit when doing 2 coats.
  • Solvent Based products like this CAN NOT ship air.  It will only ship regular Ground (You will not be able to select UPS/FedEx 2 Day or 1 Day shipping at checkout, so if you need that expedited shipping on other items in your cart, you will want to buy this sealer separately from the other items)

Concrete Countertop Sealer - Solvent Based High Gloss, Surecrete PC12 Documentation:

SureCrete's High Gloss Concrete Casting Sealer PC-12

SureCrete’s High Gloss Concrete Casting Sealer PC-12


SureCrete’s XS-PC12™ high gloss concrete casting sealer is a specially formulated two component, 59% solids hybrid solvent based polyurea coating designed for application over completed concrete surfaces. XS-PC12 high gloss casting sealer provides a low VOC (400 g/L), penetrating, film forming, color enhancing, and high gloss durable surface. high-performance clear top coat generates the premier balance of strength, flexibility, chemical and scratch resistance. XS-PC12 is ideally suited for both commercial and residential settings applied upon concrete countertops, fireplace surrounds, shower panels, floor tiles, wall panels, and all Xtreme Series materials. Like some other sealers, XS-PC-12 high gloss concrete counter top sealer becomes food safe upon curing. It is stain resistant to most household chemicals and culinary items, and is heat resistant to 300°F (149°C). XS-PC12 is distinctive in its ability to be touched up or repaired.

With it’s extremely high chemical and scratch resistance, XS-PC12 concrete casting sealer wet look is an ideal sealer for use on cast concrete pieces where you’re looking for a gloss coating as well as some color enhancement. If you’re looking to protect your own personal precast kitchen countertop or bathroom vanity, XS-PC12 food safe concrete counter sealer makes for a great sealing option. And since we all know that just about every kitchen and bath counter takes a pretty solid beating over the years, being able to touch up or repair this coating can be a huge benefit, especially if you take on the job yourself. XS-PC12 concrete sealant is also a great option for large commercial projects since it is fairly easy to apply but still provides all the wonderful qualities spoken of earlier. This can save quite a bit in labor costs as typically to seal a commercial bartop you would need multiple types of sealers to provide sufficient scratch and chemical resistance as well as color enhancement and a gloss finish with a wet look counter.


High Gloss Concrete Casting Sealer XS-PC12 Applications:

  • Cast Kitchen Counters
  • Casted Funiture
  • Concrete Outdoor Kitchens
  • Cast Shower Panels
  • Lightweight Wall Panels
  • Precast Decorative Pieces
  • Cast Building Accents
  • Concrete Floor Tiles
  • Concrete Planters
  • Bath Cement Vanities
  • Integrated Kitchen Sinks
  • Integrated Bath Sinks

How Do You Apply Concrete Countertop Sealer - Solvent Based High Gloss, Surecrete PC12?

  1. Any surface that is about to be sealed needs to be fully cured, clean and free of all contaminants, and fully profiled and etched.
  2. Pour 1 part B into clean mixing container containing three parts A. Mix mechanically for 2 minutes until catalyzed.
  3. For the first coat, pour out XS-PC12 food safe concrete sealer onto your surface and spread with a high-density foam roller, making sure to only work on areas that can be finished in about 4-5 minutes.
  4. Backroll each work area before it becomes tacky.
  5. Once the first coat is dry to the touch, the surface is ready for a second coat.
  6. The second layer is mixed and applied the same as the first coat.
  7. 24 hours after second coat is applied, the surface is ready for light use, and is fully cured and safe food concrete after seven days.

Frequently Asked Questions About XS-PC12 High Gloss Casting Sealer:

  • Question: Will PC-12 Make Concrete Food Safe?
  • Answer: After the full cure is achieved in 7 days, the sealer concrete is completely food safe.

  • Question: How long do I have to wait between coats of XS-PC12 Concrete Sealer?
  • Answer: Only until the sealed surface is dry to the touch and not tacky. If allowed to sit more than 12 hours, the surface will need to be sanded with 220 grit sand paper to ensure proper adhesion.

  • Question: Do I need to use multiple coats of XS-PC12 Gloss Sealer?
  • Answer: Technically no, but for full, proper protection, we highly recommend using two coats on any finished surface.

  • Question: Can PC-12 Be Used Outside on and Outdoor Kitchen Countertop?
  • Answer: Yes.

Specifications and Properties of SureCrete’s High Gloss Concrete Casting Sealer PC-12

Appearance (cured) Clear gloss sheen
Water Resistance Excellent beads water
Mechanical Stability Excellent
Light Stability Excellent
Appearance (wet) Clear
Odor Aromatic
Application Temperature 60 – 90 degrees Fahrenheit
Gardener direct/reverse impact >160-inch pounds
Taber Abrasion 40-60 mg loss
QUV – A less than 5.0 @ 2,000 hours
Gloss retention >95% @ 2,000 hours


Industrial & Household Chemical Resistances Testing for XS-PC12 Casting Sealer after 24 Hours:

MEK no effect
Xylene no effect
Tap Water no effect
Mineral Spirits no effect
100% Ethanol no effect
10% Acetic Acid no effect
5% Sodium Hydroxide no effect
50% Sodium Hydroxide no effect
85% Lactic Acid no effect
50% Sulfuric Acid no effect
38% Hydrochloric Acid no effect
10% Sodium Chloride Solution no effect
28% Ammonia no effect
Coffee no effect
Cola no effect
Grape Juice no effect
Ketchup no effect
Mustard transient staining
Clorox Bleach 5-10% no effect

Customer Reviews

Based on 3 reviews
33%
(1)
0%
(0)
0%
(0)
33%
(1)
33%
(1)
M
Micah MacGregor
This product was a disaster for me.

Had to seal, strip and re-seal 4 times due to different problems with the solvent. One of the times, it never even dried, just remained a sticky substance the entire time. This was done in the correct temperatures following all directions. Had to strip again, and switched to another product after ordering this twice trying to get it right.

T
Troy
Strong sealer

I've been buying the pc12 sealer for years and this last time I picked some up from Expressions they said I should write a review on this sealer since I use it so much- so here is my review guys! It's a good sealer, really brings out the color of my concrete and gives it a good high gloss. I use the xs-327 sealer too, and like that but pc12 is what I've gotten good at applying and usually the darkened color is what I go for. Just follow the instructions and it is a nobrainer good sealer guys!

Z
Zack
Not worth the cost

Ive used this sealer a few times now and im not impressed. Pour instructions. Containers they come in are difficult to pour from creates wasted product. Theres never enough of part A to part B. Every time i use this product i end up having to buy a second one. I Will never use this product again and i do not recommend.

Hi Zack, if you have any feedback on the instructions, please let us know so we can look into that. The PC-12 sealer is not ideal to pour from, this is correct. It's designed for all of part B to be dumped into part A, mixed, and immediately used to cover up to 100 sq. ft. When pulling smaller amounts out (which is fine and many do this) you just need to be careful to get the exact ratio and then you will always have the exact amount of part A left for the remaining part B. Pouring from the part B is usually easy, but the part A quart can can spill easier, so having a small measuring cup (we us a small 1/4 cup measuring cup here) that you put into the part A can and scoop it out will remove any chance of spilling and having lost product.