Faucet Hole Knockout, Disposable Foam

Faucet Hole Knockout, Disposable Foam

• Quick, easy, foam Faucet Hole Knockouts.
• Ever been frustrated trying to remove a rubber faucet hole plug?  These foam ones do the simple task of creating the knockout in the concrete for the faucet, yet are super easy to remove by just digging them out with a basic tool like a screwdriver, and don't stress the fresh concrete by trying to push a difficult rubber plug out!
• Please Note: These are foam, and subject to variance in quality! Not all are perfectly round, or perfectly centered, of the exact same size...!  But they function to get the job done.  For instance, the 2" thick version of these, many are only 1 7/8" tall, so you'll need to just use a little extra silicone on the foam when you set in your form and not push it down hard to make the foam exactly 2" in your form.
• Available in 2" height
  • NOTE: Foam is pretty easy to cut down, in case you needed a shorter height than 2" you can usually modify these foam pieces without too much effort.
• Hole size in the top of the countertop is 1.5" diameter, which is standard for both single-hole faucets, and 2 or 3 hole faucets.
• Can also be used to create holes in concrete countertops for faucets, soap dispensers, plug pass-through holes, etc.
• Sold in a 5-pack, 10-pack, or 25-pack.
  • Shape of these Faucet Plugs have a larger diameter hole on underside of the concrete countertop- to allow room for mounting bracket and nut to secure faucet (most faucets and drains aren't designed for thick concrete countertops and sinks).

Faucet Hole Knockout, Disposable Foam Specifications:

• Measurements:
  • 2" Size:
    • Height: 1-7/8" to 2" High (variance)
    • Small Hole:  @1-1/2" Diameter, 7/8-1" High
    • Large Hole (Mounting Hardware Area): 2-3/4" Diameter, @ 1" High

Faucet Hole Knockout, Disposable Foam Application:

• Secure Knockout in place with silicone.  You may need to use about 1/8" of silicone in order to make the foam piece the exact right height of your form.
• Removal- Just push it out, or dig it out with a screw driver.