Stainless Steel Custom Design Your Own Doorbell Units

Stainless Steel Custom Design Your Own Doorbell Units

• Solid stainless steel doorbell cover plate, 3/16" thick, with a brushed finish.
• Custom made stainless steel doorbell button.
• Create a custom doorbell with your company logo, hotel name, personalized address, etc.
• Great way to promote your business: Many home builders use custom doorbells we make for them. We supply realtors with unique doorbell signature designs they create, which they offer as a gift to new home purchasers.
• You specify the size, shape, and design.
• Stainless steel doorbell covers can be painted easily (we do not provide this service, but can be done using a good quality metal primer spray paint, followed by the spray paint color of your choice).
• Quantity Discounts Available: We make these for Apartment Buildings, Condos, and many other large quantity applications-  Price will come down DRASTICALLY on larger orders. Please contact us if needing multiple units of the same design.
• Art Work Requirements: see below!
• Lead time: It can take 3-8 weeks to make and ship out a custom made doorbell project.
• Illuminated LED push buttons less than 1 watt, and last approx. 11 years.
• LED buttons available in Ring-Light, or DOT style. Ring Light: A bright glow ring around a stainless steel center. DOT Light: Very bright center LED glow.
• Doorbell Buttons are theft-resistant. Each button is secured on the back of the doorbell cover by a hex-nut.
• Will work with new or existing doorbell systems, and can replace most garage door opener buttons.
• Doorbell Only. Door chimes, power transformers, and wire sold separately.
• Warranty Information: 90 day warranty against defect.

Art Work Requirements:

• Please email us your Artwork Design after you place your order, by simply replying to the order receipt email, and attach your art file.
  
• Artwork must be in Black and White only.
• 300 dpi or greater resolution.
  
• We do not engrave, we just CUT the steel. You either get steel, or you get an area where the steel is completely cut away.
  
• On your art file, anything in WHITE would be the steel doorbell cover, and anything in BLACK would be the portions the laser will cut out.
  
• All WHITE areas must be connected- otherwise the laser will cut completely through a section, and it will fall out- no longer being part of the doorbell cover.

Stainless Steel Custom Design Your Own Doorbell Units Specifications:

• Doorbell Cover Measurements: Up to 5" Wide x 5" High x 3/16" Thick.
• Need larger than 5" x 5" please contact us.
• Push Button Measurements:
• RING and DOT Light LED Buttons: 11/16"W  x 1 3/4"L.  Threads: 5/8" wide.
• Non-Lit Buttons: 11/16"W x 7/8"L. Threads: 5/8" wide.
• Push Buttons are 24V (12-24 Volts AC).
• Exceeding the button's voltage can prematurely burn out the LED in the button. If unsure, and unable to determine, we recommend ordering the 24V button to prevent the LED from premature burnout.
• Low voltage power transformers are sold separately here.

Stainless Steel Custom Design Your Own Doorbell Units Installation:

• Installation Instructions: Attach the doorbell button to the stainless steel doorbell cover using the provided hex-nut.  Drill a 3/4" (20mm) wide hole into doorjamb (or surface for doorbell) approximately 1 1/2" deep for RING or DOT Light buttons, 1" deep for Non-Lit buttons. Attach one wire to each screw terminal, which wire going to which screw terminal doesn't matter. Use the provided screws to mount the doorbell cover in place.
• Optional Tamper Resistant screws come with a special driver bit for installation/removal.  Due to the small nature of the special driver bit, it is necessary to pre-drill holes for the tamper-screws.  Failure to pre-drill the holes may result in breaking the driver bit trying to force the screws into the doorjamb or wall surface.